GMC-I-ProSyS – METSyS Current Datalogger

Request Quote

Datasheet - METSyS NEC 220 Logger

Categories: , Brand: DranetzBrand: GMC-I-ProSyS

Description

    • The Energy Harvesting METSyS Current Datalogger is a 3 phase or optionally a 4 phase current datalogger. The small flexible Rogowski coil current sensors allow for quick and easy connection to circuits to be monitored whilst its internal rechargeable battery allows for 72 hours of logging on a single charge making it ideal for short term connected load studies such as compliance with NFPA’s National Electrical Code (NEC) 2014 Article 220.87 and meeting the requirements for uniform load calculations in accordance with the requirements of the California Electrical Code (CEC).For applications where longer term measurements are required the battery life can be extended indefinitely by simply clamping the energy harvesting CT around one of the phases being measured eliminating the need for connection to a power socket.

      The logged data may be accessed through an Android app or by using a USB Flash Drive. The data is stored in a comma separated values (CSV) file format. Data analysis is simplified by using the supplied report generator or a spreadsheet.

      The free Android app communicates with the METSyS Current Datalogger via Bluetooth and enables easy logger set up, viewing of live data, remote control of logger functions and the option for emailing the logged data file.

The METSyS NEC 220 Logger 3 Phase (EU) Kit

contains:

 METSyS NEC 220 Logger

 4” Three Phase Rogowski Coil Bundle

 5V Power adaptor

 Manual

 Padded Soft carry case

Rogowski Coil Options

The Three Phase Rogowski coils are coloured to match the harmonized colour code and available in several  diameters from 2” to 6” to suit application needs

 2” Three Phase Rogowski Coil Bundle (PN: P-06.692.6)

 4” Three Phase Rogowski Coil Bundle (PN: P-06.692.7)

 6” Three Phase Rogowski Coil Bundle (PN: P-06.692.8

 

5V Power Adaptor

The 5V power adaptor is fitted with a Micro USB B  output connector for connection to power and charge the METSyS NEC 220 Logger. Interchangeable Mains  connectors are included.

Energy Harvesting CT Options

50mm Energy Harvesting CT (PN: P-00.500.1) Can be clamped around any phase to charge and extend the battery life of the METSyS NEC 220 Logger

Average Load current of 50A required to power the logger indefinitely.

15mm Energy Harvesting CT (PN: P-00.500.0)Can be clamped around any phase to charge and extend the battery life of the METSyS NEC 220 Logger

Average Load current of 100A required to power the logger indefinitely.